add auto close and change staus

.vscode/settings.json

@@ -6,6 +6,7 @@
         "i2c",
         "gpio",
         "enduser_setup",
-        "file"
+        "file",
+        "tmr"
     ]
 }

GPIO.lua

@@ -1,3 +1,5 @@
+Is_AutoClose = true;
+LightArr = {[1]=false,[2]=false,[3]=false,[4]=false}
 --Init GPIO params
 function InitGPIO()
     gpio.mode(0,gpio.OUTPUT);
@@ -14,14 +16,72 @@ end
 --Push gpio to high
 function GPIOOn(gpioId)
     if gpioId>=0 and gpioId<=4 then
-        gpio.write(gpioId,gpio.HIGH)
+        gpio.write(gpioId,gpio.HIGH);
+        LightArr[gpioId] = true;
+        PageLight(LightArr);
+        if Is_AutoClose then
+            AutoClose(gpioId);
+        end
+    end
+    if gpioId == 99 then
+        gpio.write(0,gpio.HIGH);
+        gpio.write(1,gpio.HIGH);
+        gpio.write(2,gpio.HIGH);
+        gpio.write(3,gpio.HIGH);
+        gpio.write(4,gpio.HIGH);
+        LightArr = {[1]=true,[2]=true,[3]=true,[4]=true}
+        PageLight(LightArr);
+        if Is_AutoClose then
+            AutoCloseAll();
+        end
+    end
+    if gpioId == 10 then
+        Is_AutoClose = true;
     end
 end
 --Push gpio to low
 function GPIOOff(gpioId)
     if gpioId>=0 and gpioId<=4 then
-        gpio.write(gpioId,gpio.LOW)
+        gpio.write(gpioId,gpio.LOW);
+        LightArr[gpioId] = false;
+        PageLight(LightArr);
+    end
+    if gpioId == 99 then
+        gpio.write(0,gpio.LOW);
+        gpio.write(1,gpio.LOW);
+        gpio.write(2,gpio.LOW);
+        gpio.write(3,gpio.LOW);
+        gpio.write(4,gpio.LOW);
+        LightArr = {[1]=false,[2]=false,[3]=false,[4]=false}
+        PageLight(LightArr);
+    end
+    if gpioId == 10 then
+        Is_AutoClose = false;
+    end
 end
+
+function AutoClose(gpioId)
+    local mytimer = tmr.create()
+    mytimer:register(1000, tmr.ALARM_SINGLE, function() 
+        gpio.write(gpioId,gpio.LOW);
+        LightArr[gpioId] = false;
+        PageLight(LightArr);
+    end)
+    mytimer:start()
+end
+
+function AutoCloseAll()
+    local mytimer = tmr.create()
+    mytimer:register(1000, tmr.ALARM_SINGLE, function() 
+        gpio.write(0,gpio.LOW);
+        gpio.write(1,gpio.LOW);
+        gpio.write(2,gpio.LOW);
+        gpio.write(3,gpio.LOW);
+        gpio.write(4,gpio.LOW);
+        LightArr = {[1]=false,[2]=false,[3]=false,[4]=false}
+        PageLight(LightArr);
+    end)
+    mytimer:start()
 end
 InitGPIO();
 print("gpio1-5 init over,turn all gpio to output,low")

UDPService.lua

@@ -1,8 +1,4 @@
--- UDPSocket = nil;
--- UDPIP = nil;
--- UDPPort = nil;
 require("GPIO");
-LightArr = {[1]=false,[2]=false,[3]=false,[4]=false}
 function StartUDPService()
     if UDPSocket == nil then
         UDPSocket = net.createUDPSocket();
@@ -28,14 +24,10 @@ function UDPService(s, data, port, ip)
             print(tonumber(commandSet[2]).."-"..commandSet[3])
             if commandSet[3]=="On" and tonumber(commandSet[2])~=nil then
                 GPIOOn(tonumber(commandSet[2]));
-                LightArr[tonumber(commandSet[2])] = true;
                 s:send(port, ip, "Light "..commandSet[2].." "..commandSet[3]);
-                PageLight(LightArr);
             elseif commandSet[3]=="Off" and tonumber(commandSet[2])~=nil then
                 GPIOOff(tonumber(commandSet[2]));
-                LightArr[tonumber(commandSet[2])] = false;
                 s:send(port, ip, "Light "..commandSet[2].." "..commandSet[3]);
-                PageLight(LightArr);
             else
                 s:send(port, ip, "CommandFaild");
             end